<< Previous Page INCELL Supermount 300 Series
Manufactured by INSCALE for INCELL, the Supermount 300 series is a versatile low cost mount that serves a wide variety of process control and vessel weighing applications. The unique Neoprene top plate of the 300 Series allows for vibration damping and some dynamic load compensation. Capacities range from 250 lbs to 5,000 lbs. Along with a hermetically sealed load cell, this weighing assembly is water resistant to IP65/67 standards.

2 Year Warranty
FEATURES
  • Capacity 250 lbs to 5,000 lbs.
  • Low Profile Design
  • Mounts directly to floor on structural support
  • Unique neoprene isolation pad accommodates shock and vibration, thermal expansion and load alignment
APPLICATIONS
  • Tank, Hopper & Bin Weighing
  • Batching, Blending and Mixing
  • Powder & Bulk process Weighing
  • Low Capacity Weighing
  • Conveyor Weighing
OPTIONS
  • Match Plates
  • Custom Modifications
  • Custom Frames/ Legs/ Elevation Blocks
DURABLE
  • Structural Steel Construction
  • 200% Overload Protection
  • 150% Side load Protection

SPECIFICATION

The best positioning of 300 Series mount assemblies is shown above. The mounts should be positioned with the long axis of the load cell at a right angle to the line drawn. The long axis of the load cell should point in line with any recurring force. Such as a Conveyor or Tank Scale. This will allow the least restricted vessel movement and allow for thermal expansion and contraction.

OUTLINE DRAWINGS

300 SERIES DIMENSIONS:

MODEL NUMBER

CAPACITY

W1

W2

L1

L2

S1

S2

J

H

T

300-250-5K-SS

500lbs - 5K

4.00

3.00

6.00

4.00

6.25

5.00

.62

4

.62
INCELL uses Non-proprietary load cells in all of its mounts. The following is a list of load cells that can be used with the 1000 Series mounts :
  • INCELL-DBC
  • Sensortronics-65016 RTI-5553
  • Revere 5123/9123
  • Artech-70510
  • CEltron - DSR

Other load cells may also be available.

<< Previous Page INCELL Supermount 300 Series